|
BA15s single contact bayonet socket w/ threaded busing mounting & one 18 ... Part No: 70485 |
E26/E27 medium base lampholder with flanged mounting & screw ... Part No: 70438 |
BA15d double contact bayonet with bushing mounting and 12 ... Part No: 70435 |
Shunted, single pin slim line lamp holder with slide on ... Part No: 70647 |
2G11 base vertical lamp support with push fit circular hole ... Part No: 72805 |
E26, medium base with on/off turn knob, 1/8 IPS hickey & screw ... Part No: 73666 |
The LH1038 Leviton 26800-4A9 is a twist-in socket for G24q and GX24q lamp bases. It is a white, compact fluorescent lampholder that is made from a chemical-resistant thermoplastic body for durability. It has a power rating of 120 watts and a voltage rating of 600 volts. It has a lock action that speeds up assembly and relamping time, and can be easily rotated. It also removes the extra space ... Part No: 75143 |
26w, 32w, 42w G24q-3, GX24q-3 or GX24q-4 4-pin CFL ... Part No: 75155 |
The LH0049 Leviton 13662-SNP is a T8 tombstone fluorescent socket that is a dedicated T8, 16MM lamp center, miniature bi-pin, non-shunted, turn type with lamp lock, 660W-600V. The LH0049 Leviton 13662-SNP is UL and CSA, snap-in with no post mounted, bottom load, and COF white. Link to T8 lamps that this socket ... Part No: 70105 |
E27/E27 med base incan lampholder w/two hole mounting and screw ... Part No: 70456 |
E39, 4kv pulse rated, mogul base HID socket with captive bushings & 12 ... Part No: 70526 |
The LH0152 Leviton 517 is a Fa8 slimline base, single pin, standard fluorescent and LED button socket/ lampholder that is snap-in, easy to install and is stationary. The LH0152 Leviton 517 has a maximum wattage of 660W and a voltage of 600V. Here are some key features of the LH0152 Leviton 517 socket: Snap-in installation: The socket is designed to snap into a pre-cut hole in a ... Part No: 70208 |
Shunted, T8-T12 fluorescent lamp holder with slide on mounting Link to T8, T10, ... Part No: 72545 |
E26 medium base lamp holder with perpendicular bracket and 9 inch ... Part No: 72530 |
Unshunted, T8, auto locking/ejection, right side lampholder w/bracket Link to T8 lamps that this socket fits ... Part No: 70408 |
Unshunted, T8, auto locking/ejection, left side lampholder w/bracket Link to T8 lamps that this socket fits ... Part No: 70409 |
Shunted, straight insertion lamp holder with slide on ... Part No: 74040 |
The LH0227 Leviton 26720-400 is a 13w 2 pin GX23 or GX23-2 base CFL socket. It has 4 hole vertical mount lampholder. The LH0227 Leviton 26720-400 can be used with either CFL or LED lamps with a GX23 or GX23-2 base. It is similar or equal to the American DeRosa D2713, Edwin Gaynor 1181-13-4H, Leviton 26720-400 and Satco: ... Part No: 70283 |
13w GX23, GX23-2 2pin CFL socket w/2 hole horizontal ... Part No: 70284 |
E26/E27 4kv pulse rated HID socket w/ spring clip mounting & screw ... Part No: 72538 |
Leviton 9454-D35 120v 7.2k 135'C thermal protector Snaps into 1/2 knockout, 7.2k 120v 135'c thermal protector with 6" ... Part No: 73470 |
Unshunted, rotary locking, T8 only lamp holder with push fit mounting Link to T8 lamps that this socket fits ... Part No: 74144 |
Unshunted, straight insertion lamp holder with rear mounting ... Part No: 70121 |
The LH0097 Leviton 13518 is a medium base, bi-pin, standard fluorescent or LED button lampholder that is white. The LH0097 Leviton 13518 is a snap-in, plunger, quickwire lampholder that can be used with 18AWG solid or stranded tinned. Matching end LH0098 Link to ... Part No: 70153 |
The LH0098 Leviton 13519 or 519 is a fluorescent or LED button lamp holder that is made of durable and non-conductive thermoplastic. It has contacts made of rust-resistant long lasting silver-plated copper-alloy and a cover plate made of durable long lasting stainless steel. The LH0098 Leviton 13519 or 519 has a medium bi-pin base stationary contact and can be snap-in mounted. The panel of ... Part No: 70154 |
Shunted, single pin slim line lamp holder (stationary end) w/ slide on ... Part No: 70651 |
The LH0179 Leviton 26719-200 is a compact fluorescent lampholder with a G23-2 base, 2-pin contacts, and a horizontal mounting orientation. The LH0179 Leviton 26719-200 is compatible with 5W, 7W, and 9W lamps.The LH0179 Leviton 26719-200 can replace the H.H. Fluorescent 1181-9-HOR or the Satco 90-1541. It measures 1.16 x 1.29 x 1.40 inches. ... Part No: 70235 |
E26/E27 med base incan socket with two hole mounting and screw ... Part No: 70465 |
Unshunted, disconnect V lock lamp holder with 2 hole mounting and 8 leads Link to T8, T10, ... Part No: 70684 |
The LH0016 Leviton 13654-TWP is a un-shunted linear fluorescent T5 tombstone fluorescent lampholder for G5 miniature bi-pins.The Leviton 13654-TWP has a rotary lamp lock. It has a tall profile, snap-in mounting foot with post, and is 120W-600V. The LH0016 is comparable or equal to the DM Y94RF-N, 857730, Etlin Daniels FL621-N, Leviton 13654-TWP and the ... Part No: 70072 |
LH0002 Leviton 13452 2G11 base 4-pin, twin tube fluorescent horizontal mount lampholder with slide-on mounting. Use with all Long Twin Tube fluorescent lamps with a 2G11 pin base. Molded in white thermosetting urea it has copper alloy and double-edge contacts with new easy to install design. Terminals are push-in wire type that accept 18 AWG solid, solder-sippped or twisted-tinned and fused ... Part No: 70058 |
The LH0174 Leviton 26725-411 is a 4-pin lampholder socket with a G24q-1 GX24q-1 base for 10w and 13w lamps. It is a compact fluorescent and LED lampholder with a vertical bottom screw-down and black color code. It has a voltage of 600 volts and a rated wattage of 75 watts. The LH0174 Leviton 26725-411 is made with a thermoplastic body and copper-alloy contact material. Can ... Part No: 70230 |
E26/E27 medium base lampholder w/ spring clip mounting and screw ... Part No: 70549 |
Shunted, T8-T12 lamp holder with push fit mounting and stop/post Link to T8, T10, ... Part No: 74305 |
Shunted, straight insertion T8 only, lamp holder with slide on ... Part No: 70566 |
2G11 base horizontal lamp support with rectangular foot ... Part No: 72817 |
Unshunted, rotary locking, T8-T12 lamp holder with push fit ... Part No: 73115 |
R7s, double ended halogen comprssble socket w/front flange mntng & 18 inch ... Part No: 73189 |
The Leviton 1374-1BL is a 15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Snap-In Receptacle, Straight Blade, Grounding, The 1374-1BL leads are 14GA and 6 Inches long. ... Part No: 73315 |
Unshunted, rotary locking, T5 miniature bipin lamp holder with push fit mntng Link to T5 lamps that this support ... Part No: 73196 |
E26/E27 med base incan. Lampholder w/spring clip mounting & screw ... Part No: 70451 |
The LH0151 Leviton 516 is a single pin fluorescent or LED Fa8 lampholder that is best for use with T8 single pin and T12 slimline fluorescent and LED tubes. It is rated for a maximum of 660 watts and 600 volts. The LH0151 Leviton 516 single pin socket is 1-5/8 inches in diameter and is CSA certified and UL listed. ... Part No: 70207 |
Disconnect, medium bipin lamp holder with slide on mounting Link to T8, T10, ... Part No: 70603 |
LH0403 Leviton 8647-100 E39 4kv pulse rated mogul HID socket extender extends lamp aprox 2 ... Part No: 70459 |
Shunted, rotary locking, T8-T12 lamp holder with push fit mounting & stop/post Link to T8, T10, ... Part No: 73063 |
The LH0421 Leviton 30 is an E26/E27 medium base porcelain two piece lamp holder (socket) with a center hole for a power cord. This lampholder (socket) is two-piece porcelain and keyless socket that comes with two 8-32 x 1/2 inch long mounting screws The LH0421 Leviton 30 measures 1.75 x 1.75 x 2.31 inches. ... Part No: 70477 |
The Leviton 8880 (LH0001) is a lampholder that is designed for incandescent lamps. It is a one-piece, keyless, front mount lampholder with a medium base. It is also a single circuit, back wired lampholder that is rated for 660 W and 250 VAC. The Leviton 8880 is an E26/E27 Medium base keyless incandescent unglazed porcelain socket with spring clip snap-in mount. It's a single circuit, back ... Part No: 70057 |
The LH0204 Leviton 26725-212 is an 18w G24d-2, GX24d-2 2pin CFL socket with four hole vertical mounting. It is rated up to 75 watt and 600 volts. It is made of polycarbonate and measures 1.39 x 1.30 x 1.18 inches. The LH0204 Leviton 26725-212 is tipped with green for easy identification and is a match to the Edwin Gaynor 285-D2 and the Satco ... Part No: 70260 |
E26/E27 two piece socket for mounting with 9 inch ... Part No: 70437 |
E26/E27 4kv pulse rated med base HID socket w/ spring clip mntng and 9 inch ... Part No: 70492 |
Non-shunted, T8-T12 medium bipin lamp holder with slide on or screw mounting Medium Base, Bi-Pin, Standard Fluorescent Lampholder, Low Profile, Slide-On, TurnType, Captive Nut Screws Packed Bulk, Quickwire 18AWG Solid or Str Tinned, White Captive Nut Screws Link to T8, ... Part No: 70575 |
E26/E27 med base socket w/ tapped hole L bracket mntng & screw ... Part No: 70599 |
 Leviton Unshunted, slide on or screw down T8/T10/T12 lamp holder Medium Base, Bi-Pin, Standard Fluorescent Lampholder, Tall Profile, Slide-On, TurnType, Captive Nut Screws Packed Bulk, Quick-Connect 18AWG Solid or Str. Tinned, White Link to T8, ... Part No: 75900 |
E26/E27 medium base socket with bracket mounting and 9 inch ... Part No: 70681 |
2G10, 2G11 4pin CFL horizontal lamp support with circular hole mounting Lamp end support clip, long version, snap-in stainless steel with lexan base, for use with long twin tube fluorescent with horizontally installed 2G11 base. ... Part No: 73119 |
26w, 32w G24d-3 2-pin CFL lamp ... Part No: 75157 |
Non-shunted G13 medium bipin butt-on socket Link to T8, T10, T12, ... Part No: 70060 |
The LH0033 Leviton 13451-020 is a fluorescent tombstone lampholder that is designed for a low profile panel mount. It is made with molded thermosetting urea and copper-alloy, and has double edge contacts and knife-edge contacts. It is also non-shunted and dedicated for T8linear fluorescent lamps. The LH0033 Leviton 13451-020 is comparable or equal to the ALP 216-11, DM Y98E1, 858532 and the ... Part No: 70089 |
Unshunted, T8, T12 screw down fluorescent lampholder, stationary ... Part No: 70122 |
Unshunted, straight insertion, screw down lamp ... Part No: 70124 |
The LH0153 Leviton 523 is a non-shunted, 800ma-1500ma (HO-VHO) RSDC, plunger, fluorescent or LED button lampholder socket Link to HO T10 1500mA, ... Part No: 70209 |
The LH0154 is a lamp holder socket that is unshunted, stationary, and snaps in. It is made by Leviton and is model 524 . It fits R17d RDC HO/VHO lamp bases and has ratings of 660w and 600v. The LH0154 Leviton 524 is made of thermoplastic and is UL and CSA listed. It is 0.629 inches tall and is made in Mexico. It has a stationary end and a keyway for orientations. Link to ... Part No: 70210 |
E26/E27 medium base lamp holder adapter with 12 inch ... Part No: 70516 |
Unshunted, V lock, T8 lamp holder with slide on or screw down mounting Link to T8 lamps that this socket fits ... Part No: 70540 |
Unshunted, straight insertion socket with slide on mounting & locking device Link to T8, T10, ... Part No: 73758 |
Shunted, rotary locking, lamp holder with push fit mounting and stop/post Link to T8, T10, ... Part No: 73838 |
15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Snap-In Receptacle, Straight Blade, Grounding, Leads 14GA 6 Inch Long Wired - ... Part No: 73453 |
Unshunted, T8, T12 screw down fluorescent lampholder, plunger end Link to T8 lamps that this socket fits ... Part No: 70123 |
Unshunted, T5 miniature bipin bolt down fluorescent lamp holder Link to T5 lamps that this support ... Part No: 70125 |
GX16d, 5kv pulse rated, mogul end prong lamp holder with 18 inch ... Part No: 70519 |
The LH0088 Leviton 10088 is an incandescent lampholder that is made of porcelain for strength and durability. It has a power rating of 660 Watts and a voltage rating of 250 Volts. The LH0088 Leviton 10088 also features a keyless fixture socket. ... Part No: 70144 |
The LH0096 Leviton 10085 is a porcelain keyless medium E26/E27 base lampholder for LED, incandescent and halogen lamps that is 1.500 inches in diameter and 1.690 inches tall. It has a white color, a glazed porcelain body, and a one-piece construction. The LH0096 Leviton 10085 has a voltage rating of 250 volts and a power rating of 660 watts. It also has a medium E26/E27 ... Part No: 70152 |
Shunted, V lock, T8 lamp holder with slide on or screw down mounting Link to T8 lamps that this socket fits ... Part No: 70541 |
The LH0765 Leviton 13660-OSL is a non-shunted G13 medium bipin lampholder / socket / tombstone. It is for T8 or T12 LED and fluorescent tubular lamps. The Leviton 13660-OSL has "flexible wings" for easy push fit mounting. Link to T8, ... Part No: 73133 |
13w GX23, GX23-2 2pin CFL socket w/bottom split pin horiz ... Part No: 70285 |
BA15d double contact bayonet w/two hole flange mounting and 12 ... Part No: 70434 |
E39, 5kv pulse rated mogul base HID socket w/ captive bushings and 17 ... Part No: 70704 |
PG12 base high pressure sodium socket with two hole mounting and 12 ... Part No: 70440 |
E26/E27 med base incan. lampholder two piece mounting & screw ... Part No: 70455 |
Mogul E39 to Medium base E26 4kv pulse rated lampholder ... Part No: 70460 |
E26/E27 med base 2 piece socket w/ 2 hole mount & screw terminal ... Part No: 70461 |
E26/E27 medium base lamp holder with threaded hole bracket and 10 ... Part No: 70479 |
E39 mogul base incandescent socket with 1/4 IPS cap and screw ... Part No: 70483 |
BA15s single contact bayonet socket with 2 hole flange mounting and 6 ... Part No: 70484 |
G12.7 base side prong socket with 18 leads normally for Par46 & Par38 ... Part No: 70489 |
Bay22d low pressure sodium lamp holder with two hole mount and 9 ... Part No: 70491 |
EP39 4kv pulse rated, position oriented, mogul base socket w/screw & 12 ... Part No: 70493 |
E39, 4kv pulse rated, mogul base HID socket with captive screws & 11 ... Part No: 70532 |
E39, 4kv pulse rated, HID lamp holder with captive screws and screw ... Part No: 70535 |
E26, 4kv pulse & open fixture ratedsocket with captive bushings and 35 ... Part No: 70576 |
Shunted, rotary locking, T8 only lamp holder w/ push fit mounting & post/stop Link to T8, T10, ... Part No: 70659 |
Unshunted, dual bipin lamp holder with screw down mounting and 6 ... Part No: 70678 |
Unshunted, dual bipin lamp holder with screw down mounting and 6 ... Part No: 70679 |
Shunted, straight insertion socket w/ slide on mntng and self locking device Link to T8, T10, ... Part No: 72383 |
Unshunted, T8-T12 medium bipin socket with push fit mounting and stop/post Link to T8, T10, ... Part No: 70577 |
E26/E27, 4kv pulse rated HID lamp holder with captive screws and 9 ... Part No: 70578 |
Unshunted, T8-T12 Medium Profile Snap-In with locator pin, 23mm lamp center height Link to T8, T10, ... Part No: 74304 |
Shunted, rotary locking, T8 lamp holder with push fit mounting & stop/post Link to T8 lamps that this socket fits ... Part No: 75832 |
Unshunted, T8-T12 medium bipin lamp holder with slide on ... Part No: 74146 |
4KV pulse rated E26 medium base socket with captive bushings and 9 inch ... Part No: 74320 |
Shunted, rotary locking, T8 . bipin socket w/push fit mounting Link to T8 lamps that this support fits ... Part No: 75827 |
1/2 IPS Cap with tabs for certain mogul base lamp ... Part No: 70718 |
E39 mogul base two piece socket with center hole for cord and screw ... Part No: 70582 |
Medium base 5kV Pulse Rated ... Part No: 70637 |
Unshunted, rotary locking, T5 miniature bipin socket with push fit mounting Link to T5 lamps that this support ... Part No: 74200 |
Shunted, rotary locking, T5 miniature bipin lamp holder with push fit mounting Link to T5 lamps that this support ... Part No: 73064 |
E39 6kv pulse rated mogul base socket with bushings and stak on ... Part No: 70677 |
EP39 4kv pulse rated, pos oriented, mogul base socket w/bushings & 12 inch ... Part No: 70705 |
LH0673 Leviton 380 Starter base socket with two hole mounting and screw terminal ... Part No: 72388 |
LH0675 Leviton 2006 E26 medium base socket extender that extends the lamp aprox. 1 ... Part No: 72452 |
Mogul E39 to Medium base E26 lampholder ... Part No: 72459 |
Unshunted, straight insertion, lamp holder with slide on ... Part No: 73181 |
Non-shunted, Medium Base, T8 Only Bi-Pin, Standard Fluorescent Lampholder, Extra-Low Profile, Snap-In or Slide-ON, Lamp-Lock, , Quickwire 18AWG Solid or Str Tinned, White With Panel Locator Post Link to T8 lamps that this socket fits ... Part No: 73138 |
Unshunted, rotary locking, T5 miniature bipin lamp holder with push fit mntng Link to T5 lamps that this support ... Part No: 74161 |
Shunted T5 rotary locking socket with locator post/nib and flexible wings Link to T5 lamps that this support ... Part No: 74352 |
E26/E27 medium base porcelain lamp holder for outlet box ... Part No: 72972 |
Non-shunted, T8/T10/T12 bolt down linear fluorescent lamp holder Link to T8, T10, ... Part No: 75818 |
E26/E27 medium base porcelain socket for outlet box mounting with pull ... Part No: 72973 |
The LH0795 Leviton 23652-NP is a G13 medium bipin T8 LED or fluorescent lampholder / socket / tombstone. It is a shunted and has a rotary lock for securing the lamp in place. The LH0795 Leviton 23652-NP has a 16mm lamp axis and quick wire connections. Link to T8 lamps that this socket fits ... Part No: 74077 |
E26/E27 medium base socket for outlet box mounting w/pull chain & ... Part No: 72974 |
E26/E27 medium base lamp holder with removable strap and screw ... Part No: 73192 |
E26, adjustable medium base socket with 1/8 Ips hickey & screw ... Part No: 73667 |
LH0875 Leviton 13654-EXS Unshunted, rotary locking T8-T12 to T5 converter with slide on ... Part No: 73778 |
Rubber coated E26/E27 medium base socket with pigtails Incandescent lampholder, medium base, single circuit, 660w-250v, black rubber, with shoulder for clamp type shade, with two 6 inch 16awg black and white leads ... Part No: 75913 |
LH1047 Leviton 13654-EXL T12 / T8 to T5 adapter adjusts for difference in length of T5 ... Part No: 75438 |
vertical snap in mounting socket for GX24q-6 75w 4 pin CFL ... Part No: 75524 |
Rubber coated E26 medium base socket with ... Part No: 75604 |
Tall T8/T12 rotary locking un-shunted lamp holder with ... Part No: 75801 |
Leviton LH1098 9883 E26, medium base, outlet box mount, 660w, 250v, keylessE26, medium base, outlet box mount, 660w, 250v, keyless, single circuit E26 medium base porcelain lamp holder for outlet box ... Part No: 76546 |
1/2 IPS Cap without tabs for certain medium base lamp ... Part No: 73000 |
1/2 IPS Cap with no tabs for certain mogul base lamp ... Part No: 70721 |
Leviton Y45K4-120-347V 120v, 347v 8.2k 145'C thermal protector Snaps into 1/2 knockout, 8.2k 120/347v 145'c thermal protector with 6" ... Part No: 72438 |
H.I.D. 6kv mogul base ... Part No: 70419 |
BA15s single contact bayonet lamp holder with threaded bushing and 9 ... Part No: 73187 |
Non-shunted, T8-T12 low profile lamp holder with push fit mounting and no stop/locator post Link to T8, T10, ... Part No: 76607 |
E26/E27 medium base lamp holder adapter without ... Part No: 76803 |
Halogen double ended lamp ... Part No: 70673 |
Medium Base, Bi-Pin, Standard Fluorescent Lampholder, U-Shaped Lamp, Slide-On Self- Aligning, Straight-In Double Edge, Quick-Connect 18AWG Solid or Str. Tinned - White Link to T8, T10, ... Part No: 76826 |
Fluorescent lampholder, T8/12 (G13 base), medium bi-pin, non-shunted, turn type with lamp lock, tall height, (30MM) lamp center 660W-600V. UL and CSA, snap-in with post mounted, bottom load. ... Part No: 76614 |
Shunted, G13 medium bipin, snap in, plunger side, T8-T12 fluorescent or LED socket Link to T8 lamps that this socket fits ... Part No: 76616 |
Shunted, G13 medium bipin, snap in, stationary side, T8-T12 fluorescent or LED socket Link to T8 lamps that this socket fits ... Part No: 76617 |
Tall T8/T12 rotary locking un-shunted lamp holder with post Link to T8, T10, ... Part No: 71127 |
Shunted, rotary locking, T8-T12, without post, 23mm lamp ... Part No: 74260 |
2G11 base horizontal lamp support with push fit circular hole ... Part No: 77153 |
Mogul end prong ... Part No: 70425 |
E26/E27 medium base incandescent socket with bracket through hole ... Part No: 70464 |
E26/E27 medium base socket with center hole mounting and 9 inch ... Part No: 70466 |
Wedge base incandescent lamp holder with eight inch ... Part No: 70486 |
Discontinued use ... Part No: 70487 |
BA15s single contact bayonet low voltage lamp holder with 5 inch ... Part No: 72808 |
Unshunted, straight insertion, screw down lamp ... Part No: 72317 |
LH0438 Leviton 2005-4KV Medium base 4kv pulse rated lampholder ... Part No: 70494 |
Halogen double ended lamp ... Part No: 70520 |
Halogen double ended lamp ... Part No: 70521 |
H.I.D. 5kv double ended lamp ... Part No: 70523 |
H.I.D. 5kv double ended lamp ... Part No: 70524 |
H.I.D. 5kv double ended lamp ... Part No: 70525 |
H.I.D. 4kv medium base lampholder (Discontinued with no ... Part No: 70589 |
E26/E27 medium base socket with spring clip mounting and screw ... Part No: 72884 |